Inconel X-750 Round Bars

Inconel DIN 2.4669 Round Bars, Inconel UNS N07750 Bright Bar, ASTM B637 Inconel X-750 Hex Bars Suppliers in India. Inconel X-750 Flat Bar Exporter, X-750 Alloy Cold Finished Bars, X-750 Inconel Square Bars Leading Manufacturers.

A.B. Stainless Steel is one of the largest exporter, manufacturer and supplier of Inconel Alloy 750 Round Bars in India. Inconel Alloy 750 Bars has excellent resistance to chloride-ion stress-corrosion cracking, and as well shows appropriate resistance to a number of oxidizing environments’. Inconel 750 Round Bars (also known as UNS N07750 Round Bars and Rods) is very much resistant to chemical corrosion and oxidation, and has some high stress-rupture effectiveness and low creep rates under high stresses at temperatures after suitable heat treatment.

Our Inconel 718 Bars are accessible to our valuable customers in different range of diameters, wall thicknesses and sizes in customized form and also at quite affordable rates. Meanwhile, we offer different types of these bars such as Inconel 750 Bright Bars, Inconel 750 Hex Bars, Inconel Black Bars, Inconel 750 Flat Bars, Inconel 750 Billets Bars, and Inconel 750 Forged Bars.

Inconel Alloy X-750 Round Bars Specification

Specification : ASTM B 637 / ASME SB 637, AMS 5669, AMS 5698, AMS 5699

Dimensions : ASTM, ASME and API

Size : 5 mm To 500 mm

Diameter : 0.1 mm to 100 mm

Length : 100 mm To 3000 mm Long & Above

Finish : Bright, Polish & Black

Grade : Inconel X-750 – UNS N07750

Form : Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc.

Our Inconel X-750 Round Bars conforms to NACE MR0175/ISO 15156

ASTM B637 Inconel X-750 Bars Equivalent Grades

STANDARD	WERKSTOFF NR.	UNS
Inconel X-750	2.4669	N07750

Inconel Alloy X-750 Round, Bright, Hex, Threaded Bar Chemical Composition

Grade	Ni	Cr	Al	C	Mn	Ti	Cu	Si	S
Inconel X-750	70.0 min	14.0 - 17.0	0.40 - 1.0	.08 max	1.00 max	2.25 - 2.75	0.50 max	.50 max	.01 max

X-750 Inconel Alloy Round Bars Mechanical Properties

Density	Melting Point	Tensile Strength	Yield Strength (0.2%Offset)	Elongation
8.28 g/cm3	1430°C	1267 MPa	868 MPa	25 %

Types Of Available Products AISI, ASTM, DIN, ASME Inconel X-750 Round Bars