ECOCUT 715 LE is a non-water-miscible coolant with a low oil index, a high-quality, chlorine free EP combination and polar lubrication improvers added.
By using a special, low-evaporation basic oil and a combination of selected active substances, the use of ECOCUT 715 LE leads, in comparison to conventional cutting oils to a significant reduction of the oil mist and evaporation loss generated during the machining process.
Application
ECOCUT 715 LE is a chlorine free, high performance broaching oil used for the machining of difficult to extremely-difficult machineable materials. Apart from broaching, it is also recommended for other machining methods (e.g. deep-hole-drilling, thread machining of CrNi steels), where a low-viscous, highly active cutting oil is required.
ECOCUT 715 LE stands out to its highly economical use due to the long service life of the tools.
ECOCUT 715 is conditionally suitable for use with ferrous and nonferrous metals.
ECOCUT 715 LE
Typical chemical and physical properties
Property Unit Data Test method Density at 15° C g/ml 0.89 DIN 51 757
Color ASTM 2.0 DIN ISO 2049
Kinematic viscosity at 20 °C Kinematic viscosity at 40 °C
mm²/s mm²/s
42 17
DIN 51 562-1 DIN 51 562-1
Flash point °C 200 DIN ISO 2592
Copper corrosion degree 1-20A3 2-50A3 4-100A3
DIN EN ISO 2160 DIN EN ISO 2160 DIN EN ISO 2160
Pour point °C - 15 DIN ISO 3016
