SAE-AISI 4130 Flanges

We Piyush Steel manufacturers a wide range of SAE-AISI 4130 Flange is disc, collar or ring that attaches to pipe with the purpose of providing increased support for strength, blocking off a pipeline or implementing the attachment of more items.  A SAE-AISI 4130 Flange are usually welded or screwed to the pipe end and are connected with bolts.  A gasket is inserted between the two mating flanges to provide a tighter seal.  SAE-SAE-AISI 4130 Flange is either custom with dimensions provided by the customer or they are manufactured according to published specifications.  Several organizations and associations have published specifications that provide dimensional information as well as pressure specifications at different temperatures. SAE- AISI 4130 Slip-on flange blank that, instead of the Center (pipe) hole being cut out (or drilled out) for 14" pipe it is cut out for a 6" pipe. The SAE-AISI SORF Flanges is basically used for reducing the line size where space limitations will not allow the length of a weld neck flange and reducer combination. AISI 4130 BLRF Flanges are a family of grades, which range in corrosion performance depending on their alloy content. The chemical composition based on high contents of Cr and Mo, improves intergranular and pitting corrosion resistance, respectively. SAE-AISI 4130 WNRF Flanges is equal to slip-on flange, but the fatigue strength is 50% greater than double AISI 4130 WNRF Flanges. Smooth bore conditions in such a flange can easily be attained without having to bevel the flange face and, after welding, to reface the socket weld flange as would be required with slip-on flanges. Our SAE-AISI 4130 Forged Flanges are manufactured in accordance with this specification covers AISI 4130 Forged Flanges intended primarily for petroleum and gas pipelines in areas subject to low ambient temperatures. Piyush Steel understands that your projects are important and only the best AISI 4130 Reducing Flanges will do. SAE-AISI 4130 Reducing Flanges are a specialty flange that are most often used on projects that require the fitting together of different sized pipes. The SAE-AISI 4130 Socket Weld Flanges are tapered in order to create a seal between the AISI 4130 Socket Weld Flanges and the pipe as the tapers approach the same diameter. Our SAE-AISI 4130 Screw Flanges are used with their main advantage being that they can be used for extraordinary circumstances and in highly volatile areas where welding is hazardous. Piyush Steel manufactures custom flanges and stocks 6 basic types of SAE-AISI 4130 Flange.  Although, these are the 6 most common types of A SAE-AISI 4130 Flange, Piyush Steel is a custom flange manufacturer as well and is able to create just about any type of flange necessary for your requirements.